Hammer drills are an excellent addition to your home arsenal. They are not complicated to use, and you can save a lot of money with them in the long run, while accomplishing a lot more in the process. They differ from normal drills because they also provide the forward action of a hammer. Most of these models have both options to choose from.
On this list, we have decided to present you with the greatest budget models and premium hammer drills that are built like a tank. All of them have their pros and cons. Corded models, for example, might offer greater power, but they can significantly affect your movement and ultimately make the job much longer. Furthermore, if you are looking to do light DIY work, it would be kind of ridiculous to buy a powerful $500 model that will be overkill for your purposes and make your neighbors want to go deaf.
Think about the jobs you’ll be doing with your new hammer drill and check out our list of the 20 best hammer drills that are currently circulating the market.
We will start this list with one of the finest products from Bosch, a Bulldog Xtreme rotary hammer. This drill has a multi-function selector, so you can choose between rotation only, hammer only, and rotary hammer modes. Couple this with variable speed settings, and you have a great, versatile hammer drill.
The speed trigger also has accurate bit starting. It features a powerful 7.5-amp motor that has the power to deliver up to 1,300 RPM and 5800 BPM. This is enough to deliver 2 feet per pounds of impact energy. It has a D-handle design, which is great for both downward and overhead drilling. If the bit gets into a bind, there is an integral clutch that will disengage torque transmission. the rotary hammers have a dual ball bearing armature and commutator bars made out of copper that will increase energy transfer, giving you a more efficient tool. The cord turret will give you added flexibility by allowing for 35-degree pivoting.
Considering the price, this is arguably the best rotary hammer drill on the market. It can be yours for $150.
Next, we have a great rotary hammer made by Makita. The HR2475 has a great 7.0-amp motor that is capable of delivering 1,100 RPM and 4,500 BPM, which is enough for more demanding jobs. Your gear will not get damaged thanks to the torque limiting clutch, which disengages gears in case if the bit binds. You will drill up to 50% faster because of sequential impact timing.
The durability of the drill is ensured with a combination of interlocking steel laminations, copper commutator bars, and dual ball bearing armature. The hammer drill can be set to various different positions as it has 40 bit angle settings, which is quite convenient. The optimum concrete drilling range is between 3/16 and ½-inch.
This is a very powerful drill that will impress you with the comfort and versatility it provides. It’s available for approximately $270.
Aside from being a great drill, the DEWALT DW511 ½-inch. is also a bestseller, meaning lots of people have noticed its efficiency. It is powered with a 7.8-amp motor that is equipped to handle high performance. It includes variable speed control to allow you to make precise placements of the holes on various surfaces. The DW511 offers dual work modes: drill and hammer drill. In masonry applications, the speed ranges from 0 to 46,000 BPM. This is a lightweight (4 pounds) model ideal for extended use. It features a comfortable two-finger trigger, and the drill offers amazing control thanks to the 360-degree side handle. It also has overload protection for safety. This great drill costs approximately $80.
Let us introduce you to Bosch’s 11264EVS. This is a combination hammer that has a 13-amp motor that can produce a massive 8.1 feet/pounds of impact energy. Stability and control are achieved through the use of active vibration control. The 11264EVS also has an excellent grip that is very comfortable. Changing bits is made easy with the one-handed SDS max system, so your productivity won’t suffer. This hammer also has overload protection and maintains its speed without any problems. If you are working in hammer mode, there is a Turbo power option that will deliver 20% more power.
This is an ultimate high-end hammer that always gets the job done.
XPHO7Z is a cordless hammer drill. It has a brushless motor that can deliver up to 1,090 pounds of pressure. The brushless motor runs cooler, which greatly prolongs its durability. It also packs an 18-volt lithium-ion battery. The battery is greatly optimized and can provide you with a 50% longer run time than other similar hammer drills. To top it all off, the battery can be fully charged in only 40 minutes, which is seriously impressive!
The XPH07MB has two different speeds (0-550 and 0-2,100) that can be further customized for a wide variety of applications. Also, the Star Protection technology allows the drill and battery to exchange data, which protects against overheating and overloading. The drill is ergonomically designed and lightweight to provide the greatest comfort.
This is a premium model that costs less than $250.
The D25263K is yet another rotary hammer made by DEWALT. It packs 3 Joules of impact energy, which is more than enough for most jobs. The motor has 8.5 amps of power, and the Active Vibration Control works to minimize the vibration you feel and provide you with protection and great performance. The integral clutch will guarantee you high levels of precision, bringing you great control. Max speed in forward and reverse is delivered with a premium rotating brush ring. It also features a 360-degree side handle, a kit box, and a depth rod. Not a bad deal if you ask us!
Here we have another great model made by Bosch. The RH328VC gives you one of the best weight-to-power ratios. The motor has 8.0 amps of power and can provide 2.6 feet/pounds of impact energy. It will provide you with great comfort thanks to the Active Vibration Control and good grip. There are 3 modes of operation: rotation only, hammer only, and rotary hammer.
The vario-lock feature is included to place the tool in neutral and give you an option of 12 different working positions. For precision, there is an integral clutch and a 360-degree handle. The 3-finger trigger has variable speeds and will offer you great control. The drill weighs only 7.7 pounds, which makes it easily portable. It will surely find its use in every home.
Bottom line, you cannot go wrong with this hammer drill from Bosch.
Next, we have this beauty made by Hitachi. The DV16V has a 6-amp motor that offers you no-load speed ranging from 0 to 2,900 RPM, making it one of the best in its class. For greater control, there is a variable speed dial. The ½-inch industrial grade chuck offers you a wide variety of bit sizes to use. Durability is ensured with a combination of an aluminum inner cover and the one-piece cylindrical housing. The DV16V features reduced vibration and a non-slip grip that fits comfortably in your hand. The drill weighs only 3.3 pounds and is almost 11 inches long. This isn’t a bestseller for no reason.
Bosch’s HDH183B is a brushless hammer drill made specifically for masonry and metal applications. The powerful motor delivers a no-load 0-2,100 RPM and 0-31,500 BPM. There are two-speed settings: 480 RPM (high-torque) and drilling (2,100). The drill has an upgraded all-metal chuck that provides great durability. The LED illumination will also be very handy in dark rooms.
The drill comes with an 18-volt Lithium-Ion battery and special cool pack design that pulls the heat away from it. For safety, there is a KickBack Control that will immediately stop the drill’s rotation. The precision clutch has a 25+1 setting, which is very good for this price range. Bosch once again shows who is the real boss with this model.
Next, we have DEWALT’s DCH273B. It features a brushless motor that provides better durability and an extended runtime. Vibrations are minimized, thanks to the active vibration control system. This is a cordless model that brings a solid 2.1 Joules of impact energy to the job. The load speed goes from 0-1,100 RPM and the blows per minute ratio range from 0 to 4,600. For protection, there is a factory-set clutch, and for storage, there is an efficient utility hook. It has an excellent ergonomic design, so you can use it easily for hours on end. This is another bestselling model that delivers on all accounts.
The DH38YE2 is another rotary hammer made by Hitachi. It has a solid 8.4-amp motor with which you will get a no-load speed of 510 RPM and an impact rate of 2,800 RPM. There are two modes of operation: hammer and hammer drilling. For comfort and greater control, this model has technology that minimizes vibration levels. Also, the max noise level is 95 dB, which is great if you don’t want to annoy your neighbors or damage your own hearing. For your protection, there is a safety clutch that stops the rotation if the bit breaks. The durability of the drill is ensured with a dust-proof cover, auto-stop brushes, and a grease system. All in all, this Hitachi is well worth the price.
The designers at TACKLIFE offer this very decent hammer drill at an absolutely ridiculous price of around $40. You can choose between hammer and drill function by switching the orange button on top. This drill can’t be used on reinforced concrete, though, and the maximum speed of this drill is 2800 RPM. The auxiliary handle offers 360-degree rotation, which can help you maneuver immensely.
A forward and reverse switch is included, and you’ll also get a set of 12 drill bits. The maximum bit size this drill can take ½-inch. There is also a depth rod that will help you measure how deep the bit should go. This model is both lightweight (5.5 pounds) and ergonomically sound. All in all, this is a great budget drill for lighter household jobs.
The XPH12R is another brushless and cordless hammer drill made by Makita. It offers you the choice between two speeds: 0-500 and 0-2000 RPM (0-7,500 and 0-30,000 BPM). The max torque is 530 pounds. The brushless motor will optimize battery energy use and provide you with up to 50% longer run times, all the while remaining cooler. The dual LED lights help you work in dark conditions, and your comfort is ensured with a rubberized soft grip and low weight (3.6 pounds.). You will also get two 18-volt Lithium-ion batteries that will fully charge in only 25 minutes. It can be yours for the price of $200.
The P1813 is a solid power tool kit made by Ryobi. This cordless hammer drill packs 18 volts of power to give 750-inch pounds of torque. The 4-amp hour battery features an onboard gauge that will show you how much power is left. Your battery will be charged inside of one hour, and there are three different speed settings. The 24-position clutch gives you great control. This drill can work on temperatures as low as 14 degrees Fahrenheit (-10 Celsius). Down at the base of the hammer drill, there is a magnetic bit holder, which is quite convenient. Overall, the P1813 combines good quality with an affordable price.
Meterk’s electric drill is another great budget model. It has a 7.0-amp motor that can give you the speed of up to 3,000RPM, which can also be greatly controlled. The motor is made out of copper, a material that generates 30% more power, and once you find the ideal speed, use the lock button to save it. For convenience, the side handle can be adjusted and detached. The dual mode lets you select between electric and impact drill functions. You also have the option to drill in reverse as well. The side handle gives you 360-degree adjustability.
For a price of $40, this is an absolute steal.
The Milwaukee 2607 is a good model for small home repairs. There are three drilling modes to choose from: driving, hammer drilling, and drilling. This model will enable you to work with hardwoods, masonry, and some metals. An LED panel is included to provide you illumination when you’re working in less than ideal settings. This is a cordless and lightweight model (3 pounds) that is incredibly convenient. The durability of the drill is ensured with its all-metal gear casing, and the redlink technology allows the drill to communicate with the M18 batteries to prevent overheating and overloading. You can buy this drill for around $70.
Next up is this rotary hammer from VonHaus. This is a high-performance model that packs a 10-amp motor. This motor is powerful enough to drill through wood, metal, and masonry. The no-load rotation speed goes from 0 to 850 RPM (0-3900 BPM). For your comfort, there is a standard 360-degree swivel handle with a special kind of textured grip for amazing control. There are also three working modes to choose from: hammer only, drill only, and hammer drill.
The drill is compatible with SDS and SDS-plus bits, which makes it very versatile. You also get an extra chunk to fit up to 30 mm bits. This drill comes in a set that also includes a point chisel, a flat chisel, three drill bits, a spanner, and a depth gauge. This is a mid-level model that will work ideally for larger home projects. The price is $120.
The GALAX PRO is a hammer drill powered by a 4.5-amp motor. It is suitable for working on thin metal, plastic, and wood, and offers a no-load speed of 3,000 RPM. It has the following drill capacities: 25 mm for wood and 13 mm for steel and concrete. You can choose between hammer and drill function with the switch of a button. This is a lightweight model that will not work on reinforced walls, but it features durable chuck that can fit a wide variety of drill bits, with a maximum diameter of ½-inch. A depth gauge is also included. The GALAX PRO is another lightweight model with great ergonomic properties, and also the least expensive drill on our list.
This MPT rotary hammer has three different modes: drill, chisel, and hammer drill. The high-performance motor has 8.5 amps of power, which lets you choose from 0 to 4,500 RPM. That’s more than enough for some heavier projects, and it can be used on many materials, including wood, steel, concrete, and masonry. The maximum drilling diameter is 1 inch, and the drill has a 1-inch concrete and a 0.5-inch steel capacity. Your comfort is ensured with this 360-degree rotary hammer. This is another bestseller and a very solid choice in our opinion.
We will conclude this list with a model made by AREWTEC. This drill has a 2.0 Ah motor that offers two-speed settings: 450 and 1,600 RPM. It features an integrated LED light, so you can work in a less than ideal environment, and, for precision, there is a 21 torque position clutch. In hammer mode, you can punch a hole with a max depth of 35 mm (wood), 15 mm (metal), or 10 mm (brick).
This cordless drill will be fully charged within an hour. For tight grip, there is a keyless ½-inch mechanic sleeve. With this model, you will also get the following accessories: a set of 9 drill bits, 33 driver bits, an extension bar. It is yours for $60.